Lowongan Kerja 2011 » Lowongan » vacancy Company Man Drilling, Assistant Company Man,Rig Superintendent,Tool Pusher
vacancy Company Man Drilling, Assistant Company Man,Rig Superintendent,Tool Pusher
Our Client International Oil and Gas Company in Indonesia Exploration/Production Operations, now URGENTLY looking for the perfect individual to followong of this qualification in their project site:
1) Company Man Drilling
Requirement:
High School Graduated
Min 15 years experience of Drilling and Work Over related operations experiences
Must have minimun 10 years working experience performed as drilling supervision on the rig
Max 59 years old
Must have Well Control Training at IWCF or IADC certified traiing center and process drilling certificate (MIGAS AP-III/IADC/IWCF)
2) Assistant Company Man
Requirement:
High School Graduated
Min 15 years experience of Drilling and Work Over related operations experiences
Must have minimun 10 years working experience performed as drilling supervision on the rig
Max 59 years old
Must have Well Control Training at IWCF or IADC certified traiing center and process drilling certificate (MIGAS AP-III/IADC/IWCF)
3) Rig Superintendent
Requirement:
High School Graduate
5 years experience as tool pusher in drilling rig
max 55 years old
Must have Well Control Training at IWCF or IADC certified traiing center and process drilling certificate (MIGAS AP-III/IADC/IWCF)
4) Tool Pusher
Requirement:
High School Graduate
5 years experience as tool pusher in drilling rig
max 55 years old
Must have Well Control Training at IWCF or IADC certified traiing center and process drilling certificate (MIGAS AP-III/IADC/IWCF)
If you are interest to this offer please send your application with your expectation salary and all Training attached Only shortlisted candidate will be notify, send to recruitment@eslaras.com
thnaks,
Recruitment Team
Raisuddin said,
September 29, 2009 at 4:48 pm
I am sending my c.v for the job of companyman drilling.
Raisuddin said,
September 29, 2009 at 4:52 pm
RAISUDDIN, B. TECH (MECH.ENGG)
R- 200 RAJA COURT Email:raisuddin12@yahoo.co.in
ARAMCO HOUSING CAMP Mobile:00966-556338915
ABQAIQ – 31311, K.S.A Home ph:009663572-7458
Objective:
Seeking a challenging ”DRILLING Supervisor “position in an operating Company, utilizing my experience and engineering skills to contribute for mutual growth.
Profile at a glance:
I am B. Tech Mech Engr with over 29 yrs of experience in drilling operations including deep, horizontal Multilateral/ slim hole drilling. With graduation in Engineering back ground working in a challenging oil field which has a scope to use conceptual & analytical skills under present day of high technological environment. My strength is adoptability to circumstances & rising to the occasion.
Core Competencies:
Experience of 28 years ( 10 yrs off shore jack up Rig+ 18 yrs on shore land Rig).
Knowledge of Aramco operations, safety, health & environment concern.
Sound knowledge of drilling & completion of horizontal, multilateral & smart wells.
Ability to take control of unusual well control situation,
Good knowledge of fishing & Rig building operations.
Outstanding communication & coordination skills.
Excellent team spirit, assist & interact effectively with other discipline team.
Knowledge of safety audit of rigs.
Current Assignment:
Dec2006-Till Date: Drilling Foreman-in ARAMCO Saudi Arabia Company.
Job Details: Drilled &completed horizontal, multilateral, power water injector, horizontal open hole & cased hole side track, exploration & development oil, gas, water, high temp & high press deep(16000ft), shallow (1500 ft) upper & lower completion, smart wells completion in Haradh, Shudgum, Abqaiq, Utmanya ,Dilam, Khurais & Nuyyim fields.
Run & cemented different sizes of casings (from 7” to 30”) with simple & double stages, with blended & light cement,
Run 4-1/2” & 7” mechanical & hydraulic liners.
Drilling with water base & oil base mud with different oil & water ratio, K.cl polymer mud, Saturated salt water mud, blind drilling with water when total loss encounter, heavy & light mud (19.6 ppg & 7.16 ppg ) .
June 2004-Dec 2006: Area Manager: Ankleshwar Asset-GUJRAT O.N.G.C LTD National Oil Company INDIA
Job Details: Supervised drilling & work over operations of four rigs. Drilled & completed high angle directional & horizontal wells (4500 mts). Liquidated well complications. Handled well control situations. Planned , executed & made reduction in rig shifting & rig building time.
June2003-June2004: Manager planning &Contracting, Ankleshwar Asset-GUJRAT O.N.G.C LTD National Oil Company INDIA.
Job Details: Executed contracts with service companies. Planned & Carried out materials procurement of well consumables & spare parts for the rigs
June2000-june2003:Rig Manager : Assam Asset SIVSAGAR, O.N.G.C LTD National Oil Company INDIA
Job Details: worked as rig Manager, This is more difficult area logistically &Planning and drilling deep directional wells (14000 ft). Liquidated well complication like stuck ups & well control situations.
June 1993 to June 2000: Rig Manager KG Project Rajahmundry O.N.G.C LTD National Oil Company INDIA
Job Details: Worked on shallow and deep drilling rigs, involved in drilling High Pressure Gas wells to a depth of 4000 -4500 mts & Shallow gas hazards.
Critical maintenance of Well Control Equipment, maintenance of mud parameters and adherence to the safety norms of the company were very critical to safe operations in those conditions.
Involved in drilling high pressure gas wells in Pasarlapudi , Chintlapalli and Narsapur gas field. Experienced and controlled well kicks of very high pressure.
Rig moves have been so meticulously analyzed and time brake downs of concurrent and non critical operations carried out resulting in cutting down the rig move to 50%.
As drilling operations in India especially land operations are in a very remote areas planning of well design, ordering materials, contingency plans for casings, liner hangers, cementing plans with losses and without losses and planning all service hands becomes so critical that running operations without down time is a challenge.
June 1986 to June 1993:Tool Pusher-Off Shore Rigs O.N.G.C L TD National Oil Company INDIA
Job Details: Supervise Jack-up rig operations for more than 5000 m deep oil, gas and H2S wells in Arabian Sea. Took responsibilities of crew including execution of daily drilling operations on off shore-rigs. Worked with wide range of drilling equipments including top drive with national and foreigner rig crews.
Handled well kicks, simultaneously loss and kick situations and successfully carried out fishing job whenever occurred.
Actively involved in repair maintenance of well-controlled equipments, mud handling system and other drilling equipments.
Co-ordinate with all disciplined on rigs and hired services like weather ford, smith, Halliburton and schulmbergers.
Carried out all operations with safety & environment as primary concerns.
Sept 1980-1986 Shift Driller Off-shore rigs O.N.G.C LTD National Oil Company INDIA
Job Details: As a shift driller drilled vertical exploratory and development directional well in Mumbai off shore Jack up rig. Co-ordinated with all discipline team working at rig handled shift crew. Monitored safety, health and environment
EXPERIENCE DESCRIPTION:
• Well control procedure for water oil & gas well. Use of divertor for shallow gas in surface hole.
• Window cutting with weather ford whip stock & milling equipments.
• Multilateral wells using BOT window master, weather ford /smith whip stock & section milling tools.
• Two stage cementation using Halliburton/ weather ford D.V collar.
• TCP gun perforation & smart well & ECP completion.
• Use of LWD/ MWD/ GR tools in horizontal section for steering while drilling.
• Use of abandonment KIT with CTC pkr for abandonment of bottom part of drain hole after drilling.
• Scrab liners for isolation of any part of any hole.
• Drilling problem-partial & total loss while drilling, running casing & cementation jobs. Stuck pipe in tight hole & formation swelling, section drilled with PDC bit & with high ROP.
• Logging procedure in open & case hole , reservoir & the precautions required during the jobs.
• DST running procedure, packer setting, well flowing through flare line & separator.
• Completion procedure in-open & cased hole, zone isolation with M-pass packer, schulmberger & baker hydraulic production setting, wire line operation.
Responsibilities:
• Protecting the company interest on the rig.
• Conducted pre-spud meetings, safety meetings, daily review and tailgate meetings.
• Implementation of well plan. Preparation & execution of day to day operations like-drilling, casing, cementation logging & tubing convey perforation.
• Ensuring compliance with well program and discuss the changes with Drilling Superintendent & and Drilling Engineer.
• Monitored trajectory in horizontal well using well plan software, acidizaiton, completion & monitoring well cost daily operation.
• Planning and monitoring of drilling and completion of well.
• Ordering of material and services.
• Coordinating material supply form different stores/ department/ companies.
• Coordinating services that is directional drilling, fishing, drilling tools, packer, cementing, wire line, geology.
• Review and comments on future well programs.
• Implementation of coring, logging operations and witnessing the same.
• Selection and ordering of bits.
• Pressure test BOP equipments & other drilling Equipments in compliance with the company procedures.
• Supervising well for other operations prior of rig arrival.
Training and Business Trips:
• Advance drilling seminar conducted by Gilley associates (USA) 10 days in 1985.
• Repair and maintenance of jack up rig in dock yard Dubai 20 days 1986.
• Repair and lag fabrication of jack up rig in Osaka Japan 30 days in 1987.
• Enhancement of managerial skill in Gorgon Delhi 21 days 1998.
• International gas business work shop at Bali Indonesia 5 days in 2001.
• IWCF well control training in IDT Dharadune 5 days 2006.
• IADC well control training in Dhahran KSA 5 days 2008.
• Industrial fire fighting training RT KSA 1 day 2009.
• BLS training Dhahran KSA 1 day 2008.
• Work per mitt issue training Dhahran KSA 1 day 2008.
• Hazards recognition & H2S training Abqaiq KSA 1 day 2008.
Computer Skills:
MS office, PowerPoint, excels.
Personal Particulars
Expected salary: More than the currently salary(Negotiatable)
Nationality: Indian
Date of birth: 15 June 1957
Language known: English, Hindi and Urdu
Passport valid up to 2018